우찬 모듈에 관한 기록 1.

2000년대 초 작업한 뼈대입니다. 지금 생각해보면 그 진지함이 미소짓게 하지만, 좋은 관절뼈대를 만들겠다는 사명감이 가득가득 차 있던 시기였죠. 이 버전은 양산형 뼈대에…
Read more

50cm가 넘는 캐릭터를 위한 다리 뼈대

Beginning my first work of this year. They are lower legs of 53cm-tall puppets. 새해 첫 작업으로 위 사진에 나오는 다리 관절뼈대(armature)를 만들었습니다. 이 다리는 키가 50cm가 넘는 휴머노이드 관절뼈대의…
Read more

아트 클로키 감독과 검비를 아시나요?

Art Clokey is a pioneer in the popularization of clay animation, but Koreans don't know much about him and his works. I recently heard that <Gumby Imagined: The Story of Art Clokey and His Creations> has been published. I personally have…
Read more

던킨도너츠 2017 겨울 스톱모션 광고

Last month I created armatures for Dunkin Donuts ads. The ad is finally launched today. Animation produced by Comma Studio, Korea. 스톱모션 광고 한 편이 올 연말 시즌광고의 시작을 알렸습니다. 바로 던킨 도너츠…
Read more

다양한 쓰임새를 가진 손 뼈대 부품

I first designed this hand armature part early in my career as an armature specialist. It has a simple design, yet has long been tested and has proved its value. This is why it's my favorite part among other 30 hand armatures I've made so…
Read more

커스텀 조인트를 이용한 로봇완구 광고촬영

I was recently involved in this stop-motion commercial project with custom joints for rigs. Robots weighing a lot more than 1kg each had to fly in this project. It was not that easy to make the joints that can withstand this weight because…
Read more

워커 제작을 위한 컨셉용 프로토타입

This is a proof-of-concept prototype made in 2012 for a geared rig. It was for a friend studying at the National Film and Television School (NFTS) in the UK. I always make a proof of concept before I start working on an actual product. Based…
Read more

워커 제작을 위한 베벨 기어

작업을 위해 재가공하고 있는 기어를 모아놓고 보니 마치 컵케익같이 생겼더라구요. 그래서 한 컷. 이래저래 올 한해 너무 바쁜데 이런 여유라도 없으면 금방 지쳐버릴 듯합니다.…
Read more

주문제작 Tie-down 너트

I've made these tie downs for one stop-motion animation studio a couple years ago. The studio wanted to use wire armatures with small and thin feet. If you use these customized tie downs, there is no need to file down standard nuts. You can…
Read more